Editor

Editor dialog is divided into three parts: profiles, buttons and analogs.

There is no limitation to the number of profiles.
Import Ini - import profile from ini file
Export Ini - export profile to ini file
Export Reg- export selected profile as a Registration File (*.reg); importing is done by double clicking on reg file in explorer

Maximal number of buttons is 18.
Visible - if not checked this button will not be displayed in configuration window (if you have these buttons put them last so there is no gaps in configuration display)
Primary & Secondary - default key assigment for button
Function - there are 21 total functions: 18 standard controller buttons and 3 analog modifiers. Here is explanation for some of them:

	Analog Up, Down, Left, Right - emulates analog controls with keyboard, when this is selected a scale Analog Value will be show which represents how much analog stick is pushed. If you want to use these functions don't created any analog settings because they will override these functions.
	Analog Modify Sensitivity - modifies analog sensitivity, when selected a Modify Sensitivity scale will be shown, at the middle of scale is x1 and sensitivity is not changed, left side value are lowering sensitivity and right side values are boosting sensitivity
	Analog Toggle Absolute-Relative - if analog is set to Relative this will alter it to Absolute and vice versa
	Analog Invert - inverts all analog axes

Use Analog - if it is set to default first Analog setting is used. If you specify any other analog setting that analog setting will be used when this button is pressed

Maximal number of Analog settings is 3.
First analog setting is default and it is used always unles you press a button that has Use Analog setting set to any other number
Analog setting can have One or Two Sensitivity Scales, if you select One Sensitivity Scale then you can choose if this scale represents X-Axis, Y-Axis or Both Axes. If you select Two Sensitivity Scales then left one represents X-Axis and right one Y-Axis.
Base Multiplier - something like base sensitivity. It is multiplied with the amount of mouse movement and sensitivity specified in configuration.
Max Value - it is used for limitating analog stick
Relative - mouse movements are additive. When you move your mouse to one side you must move it back to opposite side to bring back analog stick to its neutral position.
Absolute - after every mouse movement analog stick returns back to its neutral position.
Stick Retraction - speed at which analog stick returns to its neutral position (in previous versions this was always fast)
Invert Axis - this invert defines base behavior of current axis, it is not default value for configuration (like Primary or Secondary)

At the bottom of dialog you can find following buttons:

Reload - reloads all profiles. It just like you click on Cancel and then enter Editor again
Load Plugin Defaults - if you have lost your profiles or made changes to profiles that came with this plugin click this button to restore them.